SUB T-36

Art. No. -

Construction

The cabinet consists of 19 mm boards glued together (butt jointed) and a 16 mm double baffle. First of all, make the required cut-outs in the baffle and the double baffle and make the chamfers.
Start building using one of the side-panels. To this, attach the front and rear pieces, top and tunnel board. Then fit the reinforcement pieces and then the second side panel. Next, place the cabinet on its top and glue the sides for the bass tunnel in position. After that, attach the two base boards followed by the double baffle, in which you will already have prepared the mounts for the TIW 360.

If the SUB T-36 is to be used with the an active subwoofer module, cut the cut-out in the rear panel required for mounting. If an active module is not to be used, fit ST 77 terminals in the rear.

Finally, connect up the TIW 360 and mount in place.

Inner damping

The cabinet is loosely filled with 6 mats of damping material, leaving the area directly behind the bass port free. assemblage of ASM 100.

Component parts list for 1 box:

The kit includes all necessary components (see list below). Cabinet parts are not included.

Woofer:	TIW 360 8 Ohm	1 piece
Terminal:	ST 77	1 piece
Special wood screws:	5 x 30 mm	8 pieces
Countersunk screws:	3,5 x 25 mm	4 pieces
Damping material:		3 bags
Cable:	2 x 2,5 mm²	1 m
		................

Cabinet parts list for 1 box:

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front panel	322 x 413	1
Side panel	480 x 520	2
Top and bottom panel	480 x 322	3
Rear panel	322 x 463	1
Bass-reflex channel	322 x 230	1
Lath	50 x 250	2
Brace	80 x 394	1
Brace	80 x 322	2
Brace	80 x 212	1

Material: 16 mm MDF or wood
Double baffle	360 x 520	1

Enclosure

Baffle

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|