TL-SUB

Art. No. -

Construction

The TL-SUB was designed to be positioned in a corner and, for this reason, has a pentagonal base. The 19 mm sides, front and rear pieces, the dividers and the trapezoidal boards have to be chamfered and the baffle openings cut into the front piece. First of all, the two rear panels are connected to the base and then the two rear dividers and the first trapezoidal board. We recommend laying the subwoofer on its rear edge with appropriate supports. Before mounting the front divider, fix the reinforcing boards to it. Then attach the second trapezoidal board and the side panels and finally the front piece. The opening for the terminal connections can be made at any suitable place.

Inner damping

Thanks to the intelligent double transmission line arrangement, damping is not required.

Component parts list for 1 box

Woofer:	TIW 400 8 Ohm	1 piece
	TIW 360 8 Ohm	1 piece
Terminal:	BT 95/75	1 piece
Special wood screws:	5 x 30 mm	16 pieces
Countersunk screws:	3,5 x 25 mm	4 pieces
Cable:	2 x 2,5 mm²
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Bottom panel	523 x 523	1
Trapezium panel	740 x 217	2
Front panel	476 x 2150	1
Side panel	225 x 2150	2
Rear panel	561 x 2150	2
Partition	460 x 1732	1
Partition	740 x 1685	1
Top panel	740 x 150	1
Brace	160 x 131	4

sketch

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|