CT MAIN 100



Characteristics and sound properties

Characteristics and sound properties

For use as a small satellite, the CT MAIN 100 is equipped with a pair of W 100 S 4 Ohm and the G 25 ND 8 Ohm textile dome unit. The two woofers are connected in series, which produces a total impedance of 8 ohms. As a result, the CT MAIN 100 can be used in conjunction with receivers that have problem communicating with low-impedance speakers. The drivers are arranged symmetrically on the baffle based on the D'Appolito principle, where the oval front panel of the tweeter leaves only very little space between the woofers.
The CT MAIN 100 can be used as the main speaker in a multichannel system (e.g. CineTOP 100 combination using 2x CT MAIN 100, 1x CT CENTER 100 and 2x CT DIPOL 100, boosted with an active subwoofer), or as the satellite in a stereo system. As subwoofer, the SUB W-20.39 would be a suitable choice.

No longer available.

Technical Data

Rated power 60 W
Maximum power 100 W
Nominal impedance Z 8 Ohm
Frequency response 80 - 30000 Hz
Mean sound pressure level 85 dB (1 W/1 m)
Cut-off frequency 2000 Hz
Principle of Housing geschlossen / closed
Net volume 8 l
Outer dimension height 396 mm
Outer dimension width 160 mm
Outer dimension depth 210 mm
Show all data

Frequency- and impedance response

Similar Products