Art. No. 5941
Building instructions
The cabinet is not difficult to build. It is made up of a single large-scale chamber whose walls are strengthened by three reinforcing cross members and one single strengthening strut at the bottom. The most difficult part is the angled front baffle with its broad bevels on both sides. Triangular reinforcing pieces have to be glued in place from inside. It is also important to ensure that the lid and the base are exactly shaped to match the front baffle (not a right-angle).
Once the speaker cabinet is finished, it makes sense to do the "battery test": Connect a 1.5 volt battery to the terminals (plus to plus, minus to minus). Watch the diaphragms and if all four move forward together, you have connected up the drivers correctly in sync.
Inner damping
Fill the inner space uniformly with sheep's wool damping material.
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
Cabinet parts list for 1 box
| Parts |
Size (mm) |
Quantity |
| |
| Material: 19 mm chipboard or MDF |
| Rear panel |
1400 x 400 |
1 |
| Side panels |
1400 x 422 |
2 |
| Front panel |
1405 x 362 |
1 |
| Top panel |
303,5 x 362 |
1 |
| Bottom panel |
422 x 362 |
1 |
| Braces |
100 x 362 |
4 |
| Brace |
100 x 373,5 |
1 |
| Brace |
100 x 354 |
1 |
| Brace |
100 x 334 |
1 |
| |
| Material: Triangular strip |
| Braces |
1370 x 35 x 35 |
2 |
|
