Accessories

Adapter cable for fitting standard speakers into the door of Fiat Ducato (as from 2006).

Cover cap for midrange drivers which require an enclosed air volume of their own. Suits any midrange driver with a diameter of up to 10 cm. Half-round shape avoids resonances.

- Plastic: PP (P30)

Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms. Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (not supplied) or the computer's on-board power supply. Short-circuit proof.

Differences between AMP 2.2 and AMP 2.2 LN:

  • Different signal-to-noise ratio
  • Different input sensitivity for full conduction

For mobile audio application (mobile phone, MP3 player etc.) we recommend the AMP 2.2, for non-portable products (CD player, computer) we recommend the AMP 2.2 LN.

Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms. Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (not supplied) or the computer's on-board power supply. Short-circuit proof.

Differences between AMP 2.2 and AMP 2.2 LN:

  • Different signal-to-noise ratio
  • Different input sensitivity for full conduction

For mobile audio application (mobile phone, MP3 player etc.) we recommend the AMP 2.2, for non-portable products (CD player, computer) we recommend the AMP 2.2 LN.

Speaker stands, beech waxed. Packing unit: 1 pair. 1. As damping device, to avoid the transmission of enclosure resonances to the floor. 4 stands will be required for each speaker. 2. As supporting stands for VISATON horn M 300 of the VISATON speaker MONITOR 890 MK III. 3 stands for each horn or box will be required.

Bent bass-reflex vent with two flow-resistant optimized trumpet-shaped vent outlets to prevent air-flow noises and friction losses.

Double loudspeaker terminal with gold-plated binding posts and bridges. For bi-wiring or bi-amping. Including four mounting flanges for a PCB.

Damping material made of polyester wool with excellent damping properties. Can be handled and fitted easily. Packing unit: 125 g (2 mats, enough for a volume of up to 20 l)Dimensions: ca. 60 x 33 cm per mat

Protection cover made of steel sheet for DL 18/1 and DL 18/2 with two push-out holes for cables. Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany.

Protection cover made of steel sheet for DL 18/1 and DL 18/2 with two push-out holes for cables. Four mounted screws to attach terminals and cable clamps. The enlarged volume betters the sound of the inserted speaker.Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany.

Adaptor with fail safe mechanism. The FDA is equipped with an integrated fail-safe mechanism which ensures that a burnout in one loudspeaker does not lead to a failure in the entire system of connected speakers. The FDA is equipped with a ceramic terminal, a thermal fuse and a heat-resistant high-temperature wiring (10 cm) so that it conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems.

Frame dowels for mounting the cover frame to the speaker baffle. The holes (diameter: 10 mm) are drilled in one operation, through the cover frame into the speaker baffle. 1 set consists of male and female connectors.

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

FR 10 4 OHM

FR 10 8 OHM

FR 10 F 4 OHM

FR 10 HM 4 OHM

FR 10 HM 8 OHM

FX 10 4 OHM

PX 10 4 OHM

R 10 S 4 OHM

R 10 S 8 OHM

R 10 SC 4 OHM

R 10 SC 8 OHM

Protective grille made of black plastics. Suitable for many 10 cm loudspeakers.Can be supplied painted in other colours on request.

- Suitable for:

FR 10 4 OHM

FR 10 8 OHM

FR 10 F 4 OHM

FR 10 HM 4 OHM

FR 10 HM 8 OHM

FX 10 4 OHM

R 10 S 4 OHM

R 10 S 8 OHM

R 10 SC 4 OHM

R 10 SC 8 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

FR 10 4 OHM

FR 10 8 OHM

FX 10 4 OHM

PX 10 4 OHM

R 10 S 4 OHM

R 10 S 8 OHM

R 10 SC 4 OHM

R 10 SC 8 OHM

Protective grille made of silver painted metal. Decoration ring made of silver painted plastics.

- Suitable for:

FR 10 4 OHM

FR 10 8 OHM

FX 10 4 OHM

PX 10 4 OHM

R 10 S 4 OHM

R 10 S 8 OHM

R 10 SC 4 OHM

R 10 SC 8 OHM

Protective grille made of black painted metal. Decoration ring made of plastics with chrome surface (high glossy).

- Suitable for:

FR 10 4 OHM

FR 10 8 OHM

FX 10 4 OHM

PX 10 4 OHM

R 10 S 4 OHM

R 10 S 8 OHM

R 10 SC 4 OHM

R 10 SC 8 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for

:FR 10 4 OHM

FR 10 8 OHM

FR 10 F 4 OHM

FR 10 HM 4 OHM

FR 10 HM 8 OHM

FX 10 4 OHM

PX 10 4 OHM

R 10 S 4 OHM

R 10 S 8 OHM

R 10 SC 4 OHM

R 10 SC 8 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics.Can be supplied painted in other colours on request.

- Suitable for:

FR 13 4 OHM

FX 13 4 OHM

PX 13 4 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

FR 13 4 OHM

FX 13 4 OHM

PX 13 4 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

FX 16 4 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

FX 16 4 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

DX 4X6 P 4 OHM

FR 9.15 4 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Optimized fit for FRS 8 when mounting from front side.Can be supplied painted in other colours on request.Attributes:- Plastics: PC (UL 94: V-2)- Suitable for:F 8 SC 8 OHMFR 8 4 OHMFR 8 8 OHMFR 8 JS 8 OHMFRS 8 4 OHMFRS 8 8 OHMFRS 8 M 8 OHM

Protective grille made of black plastics. Suitable for many 9x15 cm loudspeakers.Can be supplied painted in other colours on request.

- Suitable for:

FR 9.15 4 OHM

DX 4x6 P 4 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.

- Suitable for:

FR 12 4 OHM

FR 12 8 OHM

Protective grille made of black plastics. Can be supplied painted in other colours on request. - Suitable for: FR 87 4 OHMSL 87 WPM 4 OHMSL 87 WPM 8 OHMSL 87 XA 8 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.Attributes:- Plastics: ABS- Suitable for: FR 7 4 OHMFRS 7 4 OHMFRS 7 8 OHMFRS 7 S 8 OHMFRS 7 W 8 OHM

Protective grille made of black painted metal. Decoration ring made of black plastics. Optimized fit for FRS 8 when mounting from rear side.Can be supplied painted in other colours on request.Attributes:- Plastics: PC (UL 94: V-2)- Suitable for:F 8 SC 4 OHMF 8 SC 8 OHMFR 8 4 OHMFR 8 8 OHMFR 8 JS 8 OHMFRS 8 4 OHMFRS 8 8 OHMFRS 8 M 8 OHM

High-End-Terminal with rigid mounting plate, 5-Layer Supra Gold Plated WBT binding posts and freely revolving pressing part. For connection cables with cross sections between 1.5 and 10 square millimetres to guarantee a proper contact for peak currents up to 200 A.

High range horn for the combination with the 1" driver DR 45 N - 8 Ohm (Art. No. 6060). The HT 21 is a horn made by aluminum die-casting in mat black and especially suited for PA applications.

Loudspeaker level control (L-pad) for treble and midrange, high power handling (up to 20 watts continuous power), with ventilation slots on the rear, left stop position equals "Off". Serves for adapting the mid- and highrange to the acoustic properties of the room. Including mounting screws.

Loudspeaker level control (L-pad) for professional applications in high-power systems. 100 W continuous power. With black metal cover for better heat dissipation, efficiency reduction scaled in dB (refering to a load impedance of 8 ohms). Easy installation. Mounting cutout: 74 mm ø

Loudspeaker terminal with solid terminal board and foam sealing for air-tight installation. For cable diameters of up to 10 mm², 2-pole, 1 red and 1 black lever each, incl. mounting screws.

Coating liquid for loudspeaker cones (black). For better internal damping, reduction of partial oscillation and linearization of the frequency response. Prevents bleaching of the cone. Especially suited for cone speakers with paper cones. Water-soluble until hardened completely. Contents: 50 ml

Loudspeaker terminal with recessed terminal board and foam sealing for airtight installation. For cable diameters of up to 10 mm2, 2-pole, 1 red and 1 black lever each. Round mounting cutout. Including mounting screws.

100 V transformer for loudspeakers in PA systems.

Typical applications:

- Allows all 4 and 8 ohm speakers to be used in 100 volt networks

Universal circuit board for 2-way crossovers, impedance compensation and level reduction possible. Material: Epoxy glass

Universal circuit board for 2-way and 3-way crossovers, impedance compensation and level reduction possible. Material: Epoxy glass

Universal circuit board for 2-way to 4-way crossovers, with even thicker copper layer; impedance compensation and level reduction possible. Material: Epoxy glass

14,8 cm Waveguide of high-quality plastic for 25 mm tweeters. The exponential enlargement provides a high sound pressure level gain in the lower high frequency range, which discharges the tweeter. In addition, the focus and the coupling to a woofer are improved, because the sound generation planes move closer together. For fixation of the tweeter on the waveguide 4 pieces M4 screws (length approx. 10 mm) are added. This waveguide is suitable for: G 25 FFL - 8 Ohm; KE 25 SC - 8 Ohm Packing unit: 1 pc.

15 x 22 cm Waveguide of high-quality plastic for 25 mm tweeters. The exponential enlargement provides a high sound pressure level gain in the lower high frequency range, which discharges the tweeter. In addition, the focus and the coupling to a woofer are improved, because the sound generation planes move closer together.This Waveguide was adjusted in width and length to 13 cm (e.g., AL 130 8 Ohm) and 20 cm (e.g., AL 200 8 Ohm) loudspeakers.For the connection of the tweeter 4 pieces M4 screws (length approx. 10 mm) are added.This waveguide is suitable for: G 25 FFL 8 Ohm; KE 25 SC 8 Ohm; DSM 25 R 8 OhmPacking unit: 1 pc.