VIB 130 TL

Characteristics and sound properties

There are plenty of transmission line fans among the speaker-building fraternity. HOBBY HiFi recently developed a super-slim speaker with a folded transmission line (TML). The VIB 130 TL cabinet suggestion is based on that idea and uses an AL 130 - 8 Ohm and a G 20 SC - 8 Ohm.

This speaker cabinet works on the basis of an organ pipe. At one end is the driver while the other end is open. Certain frequencies generate resonance which causes particularly powerful sound reproduction at the open end. The longer this tunnel, the lower the frequency.

In order to make use of this principle for low frequencies, a length of several metres would be necessary which is only possible by "folding" the transmission line tunnel twice within the cabinet to achieve convenient dimensions, as integrated in the VIB 130 TL. Apart from the intentional low frequency resonance, TML's also generate interference resonance at higher frequencies. It is only by damping the space very carefully that the desired results can be achieved.

Two internal Helmholtz resonators are in use directly behind the woofer as sound absorbers and, in conjunction with the extremely carefully positioned damping material, will ensure that the frequency response is kept beautifully smooth.

VIB 130 TL solves the problem of reproducing low-frequency bass in small rooms where the speakers have to be positioned close to walls. A distance of 10 cm is perfectly adequate.

Real deep bass is not to be confused with disco bass, which one tends to feel through the stomach rather than hear. Deep bass is soft, smooth yet powerful. However, in order to produce such power with small speakers, there has to be a trade-off with the sound pressure. As a result, the efficiency of the VIB 130 TL is relatively low but still well able to cope with normal conditions. This is counterbalanced to a large extent by the extensive frequency response. The cleanliness of the sound picture produced is remarkable with well-placed spatial locations, especially when positioned near a wall. The 20 mm G 20 SC - 8 Ohm tweeter guarantees crystal-clear, lively high-frequency reproduction and provides a smooth upper end to the range.

Component parts list for 1 box

Tweeter
1 pc.
Woofer
1 pc.
Crossover
Weiche VIB 130 TL
1 pc.
Bass reflex tube
2 pcs.
Terminal
1 pc.
Damping material
Polyesterwolle
1 bag
Wood screws
3,5 x 19 mm
4 pcs.
Countersunk screws
3,5 x 25 mm
8 pcs.
Cable
2 x 1,5 mm²
3 m

Technical Data

Rated power
60 W
Maximum power
90 W
Nominal impedance Z
8 Ohm
Übertragungsbereich (-10 dB)
30–30000 Hz
Mittlerer Schalldruckpegel
80 dB (1 W/1 m)
Trennfrequenz
3000 Hz
Gehäuseprinzip
Transmissionline
Net volume
40 l
Außenmaß Höhe
1150 mm
Außenmaß Breite
175 mm
Außenmaß Tiefe
315 mm

Frequency- and impedance response