SOLO 50
The SOLO 50 applies the SOLO 100 concept to a more compact cabinet. This makes the units suitable for smaller rooms where the larger version would be too physically overpowering or the bass too powerful.
With a net volume of 50 litres, it is essential to have an internal resonance absorber as with the SOLO 100 owing to the Q-factor of the B 200 - 6 Ohm. This can also be used to fine-tune the bass reflex. The lower limiting frequency is not as low as with the SOLO 100 but is certainly sufficient for small to medium-sized rooms. The absorber must be carefully damped again.
The correcting circuitry is designed by analogy to the SOLO 100. If you replace the 15 ohm resistance with a 22 ohm, the increase in high-frequency frequency response will be eliminated and the result as measured in the measuring room was a well-balanced spectrum. Listening tests showed, however, that, as a result of the beaming effect of this wide-range speaker, a slight increase is beneficial in most listening environments.
Rated power | 40 W |
---|---|
Maximum power | 70 W |
Nominal impedance Z | 6 Ohm |
Übertragungsbereich (-10 dB) | 42–20000 Hz |
Mittlerer Schalldruckpegel | 88 dB (2.83 V/1 m) |
Gehäuseprinzip | Bassreflex |
Net volume | 50 l |
Außenmaß Höhe | 900 mm |
Außenmaß Breite | 260 mm |
Außenmaß Tiefe | 300 mm |
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.