BF 37 - 8 Ohm
3.7 cm (1.5") fullrange speaker with a wide and balanced frequency response and very good low range reproduction. With powerful Neodymium driver and high membrane excursion limit, optimized for small vented enclosures/enclosures with passive radiator. Suitable for applications where slim construction and good music and speech reproduction are requested.
*) IP protection class for front side when built into a sealed enclosure (gluing of the loudspeaker might be necessary)
PL 7 RV - 8 Ohm (NCS S 3000-N)
7 cm (2.5") flush-mounted speaker with a threaded mounting ring at the plastic housing for easy installation in round openings without additional screws. High efficiency at frequencies relevant for speech reproduction. Including 60 cm cable.
R 10 S-TR - 100 V
10 cm (4") fullrange speaker with 100 V transformer. High efficiency and balanced frequency response, very good speech intelligibility.
Pin assignment
black: COM
brown: 6 W
red: 3 W
white: earth
WL 16 EV - 100 V
Wall-mounted speaker with a white plastic cabinet and metal grille. Fitted with a full range driver and a 100 V transformer. Clear speech reproduction properties. Connection to the 100 volt network and level trimming by means of screw terminal.
DL 25 - 100 V/8 Ohm
25 cm (10") ceiling speaker equipped with a 13 cm coaxial driver. The four mounting clamps make it easy and quick to install. The magnetic grilles cobers the loudspeaker completely and can be removed with a simple step. By the 8 Ohm and 100 V tap, the ceiling speaker is versatile.
KL 33 EN - 100 V
33 cm spherical loudspeaker. Equipped with one 17 cm bass/midrange and four midrange/highrange drivers which have a good directivity pattern at off-axis angles and therefore provide a uniform and pleasant sound quality. The KL 33 EN can be connected to a 100 V network or a normal amplifier (4 ohm).
EZ 30.10 MW
Waterproof cabinet speaker made of white plastic with metal grille and swivel bracket, stocked with two full range loudspeakers. Connection via push terminal can be easily reached behind a lid on the backside of the housing. The housing is extremely sturdy and cannot be twisted when it is installed professionaly.
PB 9.11 - 5 V
9 x 11 mm Piezo Buzzer Piezo-electric signalling transmitter for devices and applications, e.g. for industrial and office technology, medical technology, home and automotive electronics.
PB 9.9 - 3 V
9 x 9 mm Piezo Buzzer Piezo-electric signalling transmitter for devices and applications, e.g. for industrial and office technology, medical technology, home and automotive electronics.
MB 12 - 5 V
12 mm Magnetic Buzzer Electro-magnetic signalling transmitter for devices and applications, e.g. for industrial and office technology, medical technology, home and automotive electronics.