Technical Data
Sketch
Amplitude & Impedance Frequency
| Rated power | 100 Watt |
|---|---|
| Maximum power | 130 Watt |
| Nominal impedance Z | 8 Ohm |
| Frequency response | fu - 8000 Hz |
| (fu: Lower cut-off frequency depending on cabinet) | . |
| Mean sound pressure level | 91 dB (1W/1m) |
| Excursion limit | 19 mm |
| Resonance frequency fs | 28 Hz |
| Magnetic induction | 1 Tesla |
| Magnetic flux | 1100 µ Weber |
| Height of front pole-plate | 8 mm |
| Voice coil diameter | 5 cm |
| Height of winding | 1.6 cm |
| Cutout diameter | 18.5 cm |
| Net weight | 2.3 kg |
| D.C. resistance Rdc | 5.7 Ohm |
| Mechanical Q factor Qms | 3.86 |
| Electrical Q factor Qes | 0.3 |
| Total Q factor Qts | 0.28 |
| Equivalent volume Vas | 80 l |
| Effective piston area Sd | 213 cm2 |
| Dynamically moved mass Mms | 26 g |
| Force factor Bxl | 9.3 T · m |
| Inductance of the voice coil L | 1.2 mH |
Used in / Accessories:
KM 140
Ring-shaped magnets for the compensation of the stray magnetic field (magnetic shielding). The ring has to be glued on the rear pole-plate (e. g. with Pattex), reducing the stray magnetic field to a minimun, allowing speakers positionings of 20 cm apart from TV or computer screens.Suitable for: AL 200 8 OHM; AL 200 DV 2x8 OHM; GF 200 2 X 4 OHM; GF 250 2 X 4 OHM; TIW 360 8 OHM; TIW 360 DS 2 X 4 OHM; TIW 360 X 8 OHM; TIW 400 8 OHM; TIW 400 DS 2 X 4 OHM; W 250 S 4 OHM; W 250 S 8 OHM; W 300 S 4 OHM; W 300 S 8 OHM; WSP 21 S 8 OHM; WSP 26 S 8 OHM