W 130 SE - 8 Ohm
DL 13/2 8 OHM
FR 16 WP CL - 100 V
Saltwater resistant 16 cm (6.5") full-range speaker with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. Suitable for chloric air (e.g. indoor swimming pools).
*) IP protection class for front side when built into a sealed enclosure
K 28 WP - 50 Ohm
2.8 cm (1.1") miniature speaker with a plastic diaphragm (Mylar). Balanced frequency response and good voice reproduction. Particularly well suited to applications in very small devices.
*) IP protection class for front side when built into a sealed enclosure
K 36 WP - 50 Ohm
3.6 cm (1.4") miniature speaker with a plastic basket and plastic diaphragm. Ballanced frequency response and good voice reproduction. Particularly well suited to outdoor applications and where ambient conditions are generally unfavourable (e.g. high humidity).
*) IP protection class for front side when built into a sealed enclosure
K 36 WP - 8 Ohm
3.6 cm (1.4") miniature speaker with a plastic basket and plastic diaphragm. Ballanced frequency response and good voice reproduction. Particularly well suited to outdoor applications and where ambient conditions are generally unfavourable (e.g. high humidity).
*) IP protection class for front side when built into a sealed enclosure
DL 18/2 SQ - 8 Ohm/100 V
2-way ceiling and in-wall loudspeaker with white plastic frame and metal grille equipped with a 17 cm (6.5") coaxial driver. Suitable for the installation in suspended ceilings and hollow walls. Quick mounting by four screwable mounting clamps in a rectangular cut-out. Push terminals allow quick and easy connection either to a 100 V network or to a normal amplifier (8 ohm).
GRILLE 13 RS
Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request. - Suitable for: FR 13 4 OHM FX 13 4 OHM PX 13 4 OHM
AMP 2.2 LN
Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms. Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (not supplied) or the computer's on-board power supply. Short-circuit proof.
Differences between AMP 2.2 and AMP 2.2 LN:
- Different signal-to-noise ratio
- Different input sensitivity for full conduction
For mobile audio application (mobile phone, MP3 player etc.) we recommend the AMP 2.2, for non-portable products (CD player, computer) we recommend the AMP 2.2 LN.
Technical Data:
|
Power supply |
12 V DC/1.0 A |
|
Quiescent current |
46 mA |
|
Input impedance |
10 kOhm |
|
Max. current consumption |
1.1 A |
|
Power output (sine, 1% / 5% / 10% THD) |
2 x 2.1 / 3.1 / 3.3 W (4 Ohm) |
|
Input voltage (full conduction) |
700 mV |
|
Output impedance |
1.1 Ohm |
|
SNR |
81 dB (A) / 78 dB (ext) |
|
Frequency response (−3 dB) |
40 Hz–40 kHz |
|
Terminal In-/Output |
jack 3.5 mm stereo |
|
Terminal DC |
5.4 mm outer diam. (−) |
|
Net weight |
0,178 kg |
|
Temperature range |
−10 ... 50 °C |
FRS 7 W - 8 Ohm
6.5 cm (2.5") full-range speaker with balanced frequency response and very good highs. Especially suitable as built-in speaker for music reproduction and as driver for 100 V network column speakers. Very low resonance frequency and maximum cone displacement.