Woofers

AL 170 - 8 Ohm

17 cm (6.5") High-End low midrange driver with stiff, anodized aluminium cone, solid aluminium die-cast basket and elastic rubber surround. Extremely low electrical and mechanical losses due to vented pole plate, vented damper and capton voice-coil. Extremely long cone displacement due to long stroke voice coil. Suitable as low-midrange driver for 2-, 3- and 4-way high-end applications up to 2500 Hz.

AL 200 - 8 Ohm

20 cm (8") High-End woofer with stiff aluminium cone, solid aluminium die-cast basket and elastic rubber surround. Extremely low mechanical and electrical losses due to vented pole plate, vented damper and capton voice coil carrier. Fast pulse response due to light weight aluminium cone. Suitable for 2- and 3-way high end combinations and as low-midrange driver in 4-way high end systems.

DPS 40 EN - 100 V

Art. No. 50291

The DPS 40 EN dipole flat-panel loudspeaker has been specifically developed to deal with particularly critical acoustic characteristics in rooms with high reverberation levels. In contrast to the similar model DPS 40 F - 100 V, the loudspeakers of DPS 40 EN are arranged as a symmetrical array. The sound is sharply focused both in horizontal and vertical directions therefore. Because this loudspeaker is normally installed on a higher place (bottom edge about 3 m), there is a passive time delay element integrated to optimize the radiating direction at an angle of -10°. DPS 40 EN is a passive loudspeaker, so it will not require any power supply. Railway station PA speakers A key objective of public address systems in railway stations is to ensure that every message relating to railway operation and in emergencies is clearly audible to all travellers at the target location in the station. DIN EN 60268-16 sets ambitious standards for speech intelligibility because the acoustic environment on railway platforms is a difficult one. Trains arriving and leaving generate very loud ambient noises and require the loudspeakers to have a correspondingly high loudness level Announcements on adjacent platforms make other announcements unintelligible unless the sound is properly and effectively restricted to the required target area Sound reverberating from the sound-reflecting ceilings and walls in enclosed station buildings generates interference noise that makes the announcement hard to understand. The passive train station loudspeakers made by VISATON will, however, allow the required speech intelligibility to be achieved, despite the difficult surroundings. These speakers are dipole flat-panel speakers, and provide the required high levels of sound pressure while focussing the sound they produce more accurately than classic speaker systems. A dipole speaker works by creating air movement (as sound pressure waves) directly from the front and back surfaces of the driver, while the amount of sound emitted to the sides, up and down is much reduced. An arrangement of several loudspeakers in line or in a single plane results in an even more closely focussed sound image. By combining these two principles, VISATON has achieved a targeted improvement in the polar characteristics of loudspeaker systems. Thanks to this principle, the platform in front of and behind the loudspeaker is addressed and the adjacent platforms hardly hear any of it. The sound also hardly reaches the ceiling and floor so interfering reverberations that would reduce speech intelligibility are reduced.Connection (100 V) + / - Red / White 40 W White / Yellow 20 W Yellow / Black 10 W Red / Yellow 6.9 W White / Black 3.4 W

GF 200 - 2 x 4 Ohm

20 cm (8") High-End woofer with black glass fibre cone, solid aluminium die-cast basket and elastic rubber surround. Designed for multi-purpose applications due to 2 x 4 ohms double voice-coil, with excellent properties as 8 ohms drivers in series configuration. The long stroke voice-coil in conjunction with the extended rear pole plate, the vented damper, the vented magnet and the capton voice-coil carrier guarantees long strokes and highest power handling.   Possible connections: (1) one voice coil not connected (2) both voice coils in series (3) both voice coils in parallel  

KT 100 V - 4 Ohm

10 cm (4") woofer with low resonant frequency and compact size. Large strokes possible due to elastic rubber surround and deep magnet while noise is minimized through venting of air gap and t-yoke. Simple basket for various installation possibilities.

PAW 25 - 8 Ohm

25 cm (10") bass midrange for PA applications.

PAW 30 ND - 8 Ohm

30 cm (12") bass midrange for PA applications.

PAW 38 - 8 Ohm

38 cm (15") woofer for PA applications.

PAW 46 - 8 Ohm

46 cm (18") woofer for PA applications.

TIW 200 XS - 8 Ohm

20 cm (8") High-end woofer specially for use as a small subwoofer. The extra-wide elastic cone, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion. Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast cone to vent the centring unit from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads. The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly rigid and low in resonance. These design features result in high level accuracy and excellent low-range bass imaging even in smaller cabinets.

TIW 250 XS - 8 Ohm

25 cm (10") high-end woofer. The extra-wide elastic surround, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion. Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast basket to vent the spider from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads. The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly and low in resonance. These design features result in high level-accuracy and excellent low-range bass imaging.

TIW 300 - 8 Ohm

30 cm (12") high-end woofer with a black cellulose diaphragm, large-format magnet arrangement and a massive aluminium diecast basket. Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast cone to vent the spider from behind) losses and flow noise are minimised. The combination of the voice coil carrier made of capton and the large 65 mm voice coil allow extremely high volume levels.

W 100 X - 2 x 4 Ohm

10 cm (4”) woofer with low resonant frequency and compact size. The wide and elastic rubber surround allows for a large excursion. A 2x4 Ohm dual voice coil allows 2, 4 and 8 Ohm operation, as well as stereo connection, for example via the rear channels of a car radio. The easy-to-install and visually appealing metal basket make the W 100 X a versatile subwoofer for hi-fi and industry. Possible connections: (1) one voice coil not connected (2) both voice coils in series (3) both voice coils in parallel.

W 130 X - 2 x 4 Ohm

13 cm (5") woofer with robust polypropylene membrane for very compact subwoofer. Designed for multi-purpose applications due to 2 x 4 ohms double voice-coil, with excellent properties as 8 ohms drivers in series configuration. The enormous membrane displacement for its size as well as the very low resonance frequency allows a considerable sound pressure level, the one does not trust such a small speaker. Possible connections: (1) one voice coil not connected (2) both voice coils in series (3) both voice coils in parallel

W 150 X - 4 Ohm

15 cm (5.9”) woofer with robust polypropylene membrane. Powerful also in compact subwoofer applications.

W 165 A - 2 Ohm

16.5 cm (6.5“) woofer with black glass fibre cone, metal basket and robust rubber surround. Thanks to a perfected selection of materials and adhesives, the loudspeaker can also be used under extreme environmental conditions, like in extreme heat or coldness and provide the necessary bass foundation.The computer-optimized suspension geometry, focused on a very high excursion but a small installation space at the same time, allows enormous sound pressure levels without fear of a sudden limitation. This makes the W 165 A the perfect game partner, especially when it comes to high robustness.

W 170 - 8 Ohm

17 cm (6.5") HiFi woofer with very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems. Especially suited als replacement driver for many HiFi speakers.

W 170 S - 4 Ohm

17 cm (6.5") HiFi woofer with coated paper cone, powerful drive and extended rear pole plate. Special voice-coil and elastic rubber surround for long strokes.

W 170 S - 8 Ohm

17 cm (6.5") HiFi woofer with coated paper cone, powerful drive and extended rear pole plate. Special voice-coil and elastic rubber surround for long strokes. Recommended cabinets: Volume/Principle BR-Channel fb fc/QTC 20 l/closed - - 57 Hz/0,74 20 l/bass reflex BR 19.24 (length 14 cm) 44 Hz - 30 l/bass reflex BR 15.34 (length 12 cm) 39 Hz - 50 l/bass reflex BR 15.34 33 Hz -

W 200 - 4 Ohm

20 cm (8") woofer with very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems. Especially suited as replacement driver for many HiFi speakers.

W 200 - 8 Ohm

20 cm (8") woofer with very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems. Especially suited as replacement driver for many HiFi speakers.

W 200 S - 4 Ohm

20 cm (8") HiFi woofer with strong drive, extended rear pole plate and 35 mm voice-coil for high power handling. Elastic rubber surround and coated paper cone. Recommended cabinets: Volume/Principle BR-Channel fb fc/QTC 15 l/closed - - 70 Hz/0,7 20 l/bass reflex BR 19.24 (length 14 cm) 45 Hz - 30 l/bass reflex BR 19.24 (length 11 cm) 39 Hz - 50 l/bass reflex BR 15.34 (length 13 cm) 33 Hz -

W 200 S - 8 Ohm

20 cm (8") HiFi woofer with strong drive, extended rear pole plate and 35 mm voice-coil for high power handling. Elastic rubber surround and coated paper cone. Recommended cabinets: Volume/Principle BR-Channel fb fc/QTC 15 l/closed - - 70 Hz/0,7 20 l/bass reflex BR 19.24 (length 14 cm) 45 Hz - 30 l/bass reflex BR 19.24 (length 11 cm) 39 Hz - 50 l/bass reflex BR 15.34 (length 13 cm) 33 Hz -

W 250 - 8 Ohm

25 cm (10") woofer with air-dried cone and cone reinforcement. Front or rear mounting possible. Very good price/performance ratio and high power handling. Recommended cabinets: Volume/Principle BR-Channel fb 30 l/bass reflex BR 15.34 (11 cm lang) 46 Hz 50 l/bass reflex BR 15.34 (9 cm lang) 38 Hz 70 l/bass reflex BR 15.34 (8 cm lang) 38 Hz

W 250 S - 4 Ohm

25 cm (10") HiFi woofer with strong drive, extended rear pole plate and 38 mm voice-coil for high power handling. Elastic rubber surround, coated paper cone and magnet vent. Recommended cabinets: Volume/Principle BR-Channel fb 50 l/bass reflex 2 x BR 15.34 43 Hz 70 l/bass reflex 2 x BR 15.34 39 Hz 1 x BR 25.50 (length 7 cm) 100 l/bass reflex 2 x BR 15.34 (length 10 cm) 34 Hz

W 250 S - 8 Ohm

25 cm (10") HiFi woofer with strong drive, extended rear pole plate and 38 mm voice-coil for high power handling. Elastic rubber surround, coated paper cone and magnet vent.Recommended cabinets: Volume/Principle BR-Channel fb 50 l/bass reflex 2 x BR 15.34 43 Hz 70 l/bass reflex 2 x BR 15.34 39 Hz 1 x BR 25.50 (length 7 cm) 100 l/bass reflex 2 x BR 15.34 (length 10 cm) 34 Hz

W 300 - 8 Ohm

30 cm (12") woofer with air-dried cone and pressure vented pole piece. Can be fitted at front or rear. Excellent value for money coupled with very good power-handling capabilities. Particularly suitable as a replacement for HiFi speakers. Recommended cabinets: Volume/Principle BR-Channel fb fc/QTC 70 l/closed - - 56 Hz/0,8 100 l/closed - - 49 Hz/0,71 150 l/closed - - 43 Hz/0,62 70 l/bass reflex BR 25.50 (length 7 cm) 36 Hz - 100 l/bass reflex BR 25.50 (length 20 cm) 32 Hz - 150 l/bass reflex 2 x BR 15.34 (length 7 cm) 29 Hz -

WS 17 E - 4 Ohm

17 cm (6.5") HiFi woofer with coated paper cone, elastic rubber surround and inverse dust-cap. Due to the balanced frequency response also suitable as low-midrange driver for 4-way speaker systems. Due to the special basket design especially suitable as replacement driver for many HiFi speakers.

WS 17 E - 8 Ohm

17 cm (6.5") HiFi woofer with coated paper cone, elastic rubber surround and inverse dust-cap. Due to the balanced frequency response also suitable as low-midrange driver for 4-way speaker systems. Due to the special basket design especially suitable as replacement driver for many HiFi speakers.

WS 20 E - 4 Ohm

20 cm (8") HiFi woofer with polypropylene cone. Due to balanced frequency response curve suitable as low-midrange driver for large 4-way speaker systems. Due to the special basket design suitable as replacement driver for many HiFi speakers.

WS 20 E - 8 Ohm

20 cm (8") HiFi woofer with polypropylene cone. Due to balanced frequency response curve suitable for 2-way-applications up to 2000 Hz and as low-midrange driver for large 4-way speaker systems as well. Due to the special basket design suitable as replacement driver for many HiFi speakers.

WS 25 E - 8 Ohm

25 cm (10") woofer with coated paper cone, rubber edge and extended rear pole plate for long strokes. Due to the basket design especially suited as replacement woofer for many standard HiFi speakers.