FD 18 L
Protection cover made of steel sheet for DL 18/1 and DL 18/2 with two push-out holes for cables. Four mounted screws to attach terminals and cable clamps. The enlarged volume betters the sound of the inserted speaker.Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany.
BS 130 - 4 Ohm
Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.). No enclosed cabinet is required. Using the BS 130 - 4 Ohm, this enables the lowest bass frequencies, such as those used for effects in films, to be reproduced in such a way that they are felt through the body rather than heard.
Please find further information on exciters here: Basic principles of exciter-technology (PDF; 388 KB)
UL 87 4 OHM
FR 8 WP - 4 Ohm (black)
Saltwater resistant 8 cm (3.3") full-range speaker with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. Clear-cut high-range output.
*) IP protection class for front side when built into a sealed enclosure
_More speakers_
For data of older speakers (starting from 1984) please see: "Download T/S parameters" (172 KB)
FR 8 WP - 8 Ohm (white)
Saltwater resistant 8 cm (3.3") full-range speaker with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. Clear-cut high-range output.
*) IP protection class for front side when built into a sealed enclosure
FR 8 WP - 4 Ohm (white)
Saltwater resistant 8 cm (3.3") full-range speaker with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. Clear-cut high-range output.
*) IP protection class for front side when built into a sealed enclosure
AMP 2.2
Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms. Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (not supplied) or the computer's on-board power supply. Short-circuit proof.
Differences between AMP 2.2 and AMP 2.2 LN:
- Different signal-to-noise ratio
- Different input sensitivity for full conduction
For mobile audio application (mobile phone, MP3 player etc.) we recommend the AMP 2.2, for non-portable products (CD player, computer) we recommend the AMP 2.2 LN.
Technical Data:
|
Power supply |
12 V DC/1.0 A |
|
Quiescent current |
46 mA |
|
Input impedance |
10 kOhm |
|
Max. current consumption |
1.1 A |
|
Power output (sine, 1% / 5% / 10% THD) |
2 x 2.1 / 3.1 / 3.3 W (4 Ohm) |
|
Input voltage (full conduction) |
60 mV |
|
Output impedance |
1.1 Ohm |
|
SNR |
61 dB (A) / 59 dB (ext) |
|
Frequency response (−3 dB) |
40 Hz–40 kHz |
|
Terminal In-/Output |
jack 3.5 mm stereo |
|
Terminal DC |
5.4 mm outer diam. (−) |
|
Net weight |
0,178 kg |
|
Temperature range |
−10 ... 50 °C |
FR 13 - 4 Ohm
13 cm (5") full-range loudspeaker with an inverted cone. Uniform frequency response and powerful low-frequency output. Simple installation e.g. in vehicles with loudspeaker mounts for 13 cm loudspeakers.
