Products

DK 130 X - 100 V

Re-entrant horn speaker with 100 V transformer. Compact dimensions an waterproof design. High sound pressure and wide range of frequency response guarantee excellent voice quality. Pivoting metal frame for mounting walls, ceilings, columns etc.

DK 8 D - 100 V/20 Ohm

Re-entrant horn speaker with 100 V transformer and integrated capacitor for line monitoring by impedance measurement. Five-stage level adjustment for 100 V model via knob, in addition 20 Ohm possible. High sound pressure and wide range of frequency response guarantee excellent voice quality. Pivoting metal frame for mounting walls, ceilings, columns etc.

EX 60 XWP - 8 Ohm

Electro dynamical exciter for stimulating bending waves on plates in a water prrof plastic cabinet. The unit can be attached to the surface of the plate by gluing or screwing. Electrically, the exciter is controlled via a 1.5 m long supply cable. Please find further information on exciters here: Basic priciples of exciter-technology (PDF; 388 KB)

Please find further information on exciters here: Basic principles of exciter-technology (PDF; 388 KB)

*) Maximum long term power according to DIN EN 60268-5

GRILLE 10 R/134 OL

Protective grille made of black painted metal. Decoration ring made of black Plastics. Can be supplied painted in other colours on request.

GRILLE FR 58

Protective grille made of black painted metal. Decoration ring made of black plastics. Can be supplied painted in other colours on request.   Attributes: - Plastics: ABS

K 28.40 H - 8 Ohm

2.8 cm x 4 cm (1.1” x 1.6”) speaker with paper cone in a rectangular cabinet with 3M VHB 5915 adhesive tape (25 mm x 40 mm) on rear side for quick and easy installation. Small dimensions due to neodymium magnet. Connection realised by a 120 mm long cable and JST PHR-2 connector. With well-balanced sound transmission.

K 70 WP - 8 Ohm

7 cm (2.8") full-range speaker with plastic basket and plastic diaphragm. Broad frequency response ad good voice reproduction. Particularly well suited to outdoor applications and where ambient conditions are generally unfavourable (e.g. high humidity).

PAM 13 - 8 Ohm

13 cm (5") Midrange driver for PA systems.

R 10 SC - 100 V

Magnetically shielded 10 cm (4") fullrange speaker with high efficiency, balanced frequency response and high frequency rise for good off-axis speech intelligibility. Water-repellent cone and rubber gasket. Especially suitable as speaker for public applications and public transport systems. With 100 V transformer. An spring-terminal block, which can be fixated via catch pins, allows quick and easy connection to a 100 V network.

SC 3.7 ND WP - 8 Ohm

3 x 7 cm (1.2" x 2.8") fullrange driver with balanced frequency response and a clear highrange reproduction. Extremely small size due to a neodymium magnet system. Applicable as built-in speaker in TV‘s and PC‘s with very small mounting space.


*) IP protection class for front side when built into a sealed enclosure (gluing of the loudspeaker might be necessary)

SL 87 FS - 8 Ohm

8 cm (3.3”) full-range speaker with plastic cone and ferrite magnet. Very flat design, optimized for good voice and signal quality in public transport.

UL 7 EN - 100 V

Cabinet-housed speaker for use in lighting systems. Stainless steel cabinet (V2A). Equipped with two 7 cm fullrange speakers and an 100 V transformer.

W 100 X - 2 x 4 Ohm

10 cm (4”) woofer with low resonant frequency and compact size. The wide and elastic rubber surround allows for a large excursion. A 2x4 Ohm dual voice coil allows 2, 4 and 8 Ohm operation, as well as stereo connection, for example via the rear channels of a car radio. The easy-to-install and visually appealing metal basket make the W 100 X a versatile subwoofer for hi-fi and industry. Possible connections: (1) one voice coil not connected (2) both voice coils in series (3) both voice coils in parallel.

W 150 X - 4 Ohm

15 cm (5.9”) woofer with robust polypropylene membrane. Powerful also in compact subwoofer applications.

W 165 A - 2 Ohm

16.5 cm (6.5“) woofer with black glass fibre cone, metal basket and robust rubber surround. Thanks to a perfected selection of materials and adhesives, the loudspeaker can also be used under extreme environmental conditions, like in extreme heat or coldness and provide the necessary bass foundation.The computer-optimized suspension geometry, focused on a very high excursion but a small installation space at the same time, allows enormous sound pressure levels without fear of a sudden limitation. This makes the W 165 A the perfect game partner, especially when it comes to high robustness.