Do you have any questions?

SC 5 - 8 Ohm

Art. No. 8005

Magnetically shielded 13 mm (0.5") polycarbonate dome driver for the high-frequency range above 4000 Hz. Balanced frequency response, excellent omnidirectional sound distribution and high efficiency. Suitable for small sized shielded 2-way combinations for surround center speakers and multi media systems in conjunction with the shielded fullrange driver F 8 SC 8 Ohm.

*Gross price for private customers. Industrial prices are available on request.
Technical Data
Sketch
Amplitude & Impedance Frequency
Directivity pattern
Nominal impedance Z 8 Ohm
Frequency response 1500–22000 Hz
Mean sound pressure level 90 dB (1 W/1 m)
Opening angle (-6 dB) 107°/8000 Hz
Resonance frequency fs 2000 Hz
Magnetic induction 0.7 T
Magnetic flux 33 µWb
Height of front pole-plate 2 mm
Voice coil diameter 13 mm
Height of winding 2 mm
Cutout diameter 48 mm
Net weight 0.098 kg
Connections 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-)
Peak power handling with high pass 100 W (12 dB/Okt.; 6000 Hz)
Nominal power handling with high pass 60 W (12 dB/Okt.; 6000 Hz)

Used in / Accessories:

CT CENTER 81

The CT CENTER 81 is a compact, enclosed 3-way system with well-balanced sound quality and complete magnetic shielding, as required for example if positioned close to a TV or PC. Inside the cabinet, we use magnetically shielded speakers, types F 8 SC - 8 Ohm (8 cm full-range) and SC 5 - 8 Ohm (10 mm tweeter) and the complete speaker then meets the shielding requirements of the THX® regulations (3-Gaussian curve). The asymmetric design of the front baffle and of the crossover unit provide good omnidirectional sound distribution both vertically and horizontally. It is possible to install the speakers in the upright position, as is usual for multimedia systems, or lying down on top of a TV, as is usual with surround systems.

In terms of sound quality, the CT CENTER 81 produces clear-cut sound, well removed from the speakers, but with remarkably well-formed bass reproduction for a system of this size.

NANO SAT MK II

NANO, Visaton's magic baby, has been revamped. In this new version, the rear-mounted tweeter has been dispensed with and the crossover unit adapted accordingly. This has enabled improvements in the natural quality of voice reproduction. In addition, the NANO is now far less susceptible to changes in position, especially the distance between the speakers and the wall. It is now possible to integrate them without loss of quality in bookshelves.

If you combine the NANO SAT MK II with the NANO SUB PR, you get a speaker system that is totally living-room friendly consisting of tiny satellites and a compact subwoofer which, all-in-all, sounds like a far larger, uncompromising column speaker set-up.

Art. No. 5980

PORTRAIT

Many lovers of music have one problem in common: they want to listen to good music at a high quality of reproduction but they do not have the room to place the loudspeakers they would like to buy or they cannot find the right speakers to blend in with their furnishings and taste. What they need is loudspeakers that do not look like loudspeakers.

And so we developed the PORTRAIT design, which can be hung on the wall and looks like a picture. The objective was to keep the cabinet as flat as possible. The PORTRAIT will be satisfied with only 40 mm in depth. If you take the time to make some more complex cut-outs, you can even reduce this to 34 mm.

This is made possible by the use of particularly slim 13 cm FR 12 - 8 Ohmloudspeakers as woofers. Combined with the SC 5 - 8 Ohm tweeter and the specially designed crossover, this produces a sophisticated satellite speaker unit. Due to the small cabinet, low bass cannot be produced by the PORTRAIT. As a result, the bass range below 100 Hz is best covered by a subwoofer (e.g. SUB-W 20.39 ).

This combination with a powerful subwoofer means that the PORTRAITset-up is a visually appealing and acoustically highly effective system which can, if required, be extended. If the wall space in front of and behind the listening position are free, additional PORTRAIT speakers can be hung to produce a multi-channel system for home theatre and music.

The point about the PORTRAIT is the option of fitting a fabric front to the cabinet which can vary, depending on the surroundings, e.g. single-coloured or brightly coloured silk. Of course, one can always put one's creative skills to work and make one's own silk covers adorned with favourite motifs. There are no limits to your imagination.

Art. No. 5951

Are you looking for a bespoke solution?

Contact us